-
Century HST225 Motor 2.25 HP 115/230v
Regal BeloitU9384$400.00Century(R) Centurion(R) Pro HST225 Pool and Spa Pump Motor; 2.25 HP, 3450 RPM, 115/230 V, 56J, Threaded Shaft 115/208-230 Volts 10.2-10.9/20.4 Amps 1.0 Service Factor C FLANG POOL... -
Century HSQ095 Motor .95 HP 115/230v
Regal BeloitU9997$250.00Centurion Pro 0.95 thp Single Speed 115/230V 12.2/6.1 Amp 1.0 S.F. (.95 T.H.P.) Square Flange MotorCentury HSQ095 Square Flange, Premium replacement pump motors; 0.95 T.H.P., 3450 RPM, 115/230V, 12... -
Century HSQ220 Motor 2.20 HP 115/230v
Regal BeloitU9671$395.00Century(R) Centurion(R) Pro HSQ220 Square Flange Pool and Spa Pump Motor; 2.20 THP, 3450 RPM, 230 V, 48Y, Threaded Shaft KEY FEATURES Premium Sealed 203 Bearings Both Ends -
Century HST150 Motor 1.50 HP 115/230v
Regal BeloitU9989$310.00Century(R) Centurion(R) Pro HST150 Pool and Spa Pump Motor; 1.5 HP, 3450 RPM, 115/230 V, 56J, Threaded Shaft 115/230 Volts 8.6/17.2 Amps 1.0 Service Factor -
Century HSQ125 Motor 1.25 HP 115/230v
Regal BeloitU9987$275.00Enhance the performance of your pool or spa with the Century HSQ125 Motor. Designed for unmatched durability and efficiency, this 1.25 HP motor is the perfect solution for any water circulation needs...
Description
Century(R) Centurion(R) Pro HSQ165 Square Flange Pool and Spa Pump Motor; 1.65 THP, 3450 RPM, 115/230 V, 48Y, Threaded Shaft
KEY FEATURES
- Premium Sealed 203 Bearings Both Ends
- Open & Accessible Terminal Board & Wiring Compartment For Easy Installation
- New Triple Seal Protection on Pump-End Bearing
- Voltage Change Device
- Definitive Shaft Access (7/16" Wrench)
- UL 1081 Design
- 50°C Ambient
- 303 Stainless Steel Shaft
- Centurion PRO
Nameplate Specifications
| Output HP: | 1.65 Hp | Output KW: | 1.2 kW |
| Frequency: | 60 Hz | Voltage: | 230/115 V |
| Current: | 9.4/18.8 A | Speed: | 3450 rpm |
| Service Factor: | 1 | Phase: | 1 |
| Duty: | Continuous | Insulation Class: | F |
| Frame: | 48Y | Enclosure: | Open Drip Proof |
| Thermal Protection: | Automatic | Ambient Temperature: | 50 °C |
| UL: | Recognized | CSA: | Y |
| Number of Speeds: | 1 |
Technical Specifications
| Electrical Type: | Capacitor Start Induction Run | Starting Method: | Across The Line |
| Poles: | 2 | Rotation: | Counterclockwise Pump End |
| Mounting: | Round | Motor Orientation: | Horizontal |
| Drive End Bearing: | Ball | Opp Drive End Bearing: | Ball |
| Frame Material: | Rolled Steel | Shaft Type: | 1/2 Thread |
| Overall Length: | 14.12 in | Frame Length: | 10.13 in |
| Shaft Diameter: | 0.625 in | Shaft Extension: | 0.906 in |