Free Ground or Expedited Shipping Calculated at Checkout
POOLEYE PE21 Inground Pool Alarm with Remote Receiver! by Smartpool
Pool Alarm Details:
PoolEye Alarm System PE21 for inground pools, with temperature monitor and remote receiver
PoolEye(TM) alarms are equipped with the most advanced pool alarm technology available subsurface wave detection. PoolEye(TM) alerts you to accidental falls into the pool and unwanted pool intrusion while eliminating false alarms from wind, rain, falling leaves, etc. It detects objects weighing 15 lbs or more entering the pool, and all models feature adjustable sensitivity. A PoolEye(TM) alarm is an essential addition to any pool safety program.
All aboveground pool models monitor pools up to 24' round or 16' x 32' oval*. The PoolEye(TM) PE12 is the standard aboveground pool model, and the PE13 for aboveground pools is equipped with both poolside and in-home remote alarms.
All inground PoolEyes(TM) monitor pools up to 18' x 36'*. The PE20 is PoolEye's(TM) standard inground pool alarm and the PE21, also for inground pools, comes with both poolside and in-home remote alarms and a poolside air/water temperature monitor. In addition to subsurface wave detection technology, the PoolEye(TM) PE22 for inground pools features an added layer of protection Infrared "Night Vision", which monitors the pool area. The PE22 also comes equipped with an in-home remote alarm that alerts you with human voice announcements and/or siren, depending on the level of intrusion.
Uses subsurface wave detection technology - the most accurate pool intrusion detection available
Affordable and easy to install
Patented sub-surface propagation wave detector
Sensor placed below water surface eliminates false alarms due to wind, rain, etc.
Detects objects 15 lbs or more (sensitivity adjustable)
Stainless steel deck mounting system and ladder mounting system included
120 dB alarm siren at poolside, 95 dB at 10ft.
Tested to UL 464 and CSA C22.2
Child-proof ON/OFF switch with audio indicator
Built-in RF channel A or B select
Remote receives signal up to 100' away
Remote can be connected to a home security system
2 thermostats for monitoring both water and air temperature
Automatic low battery check - chirps every 60 seconds
Recommended for pools up to 18' x 36' (larger pools require additional alarm)
Automatic reset in 3 minutes
Power check test button
Operates on one 9 Volt battery and 1 AA battery (not incl.)